How to Prolong the Service life of Impact Crusher for Sale?

In the sand making production line, impact crusher for sale is used as secondary crushing machine after the jaw crusher. Materials are crushed into 20-60mm particle size by impact crusher for sale. In order to prolong the service life of impact crusher for sale, it is necessary to do maintenance regularly.

Check the motor and lubrication system every week. To check the following: whether the fixed position is tightened enough; the condition of belt conveyor transmission, bearing sealing, impact plate, liner. Lay down regular examine and repair system.

Adjustment of clearance between impact plate and rotor: Do not adjust the clearance when the rotor is running. If the lump material blocked between the impact plate and plate shell, it is better to rise up the impact bracket lightly. In this way, the lump materials will be loosened and make the adjustment easier. In this way, the lump materials will be loosened and make the adjustment easier. Loose the bolt sleeve, rotate the long nut, and then the draw bar will raise up. Finally, tighten the screw sleeve.

Replacement of Impact crusher for sale’s wear parts: First, Open the rear upper bracket. Demount the connecting bolt between the rear upper bracket and middle case, and then screw it to the position of hexagon head by wrench, then the upper bracket will open. At the same time, hang up the rear bracket by using the suspension device above the bracket. Repeat the above procedure, the rear upper bracket will be closed. In order to avoid the damage of fastening piece and other parts, it is needed to adjust or replace the hammer head of the impact crusher for sale when it is abraded to a certain degree. The impact liner shall also be replaced regularly.

Users’ of impact crusher shall also pay great attention to the bearing of impact crusher. If the temperature of the bearing is too high, you shall check the following: 1. whether the lubrication grease is too much or not enough 2. Clean the bearing and change the lubrication grease when it is not clean.

The above methods are offered by our company’s senior engineer, if you have more questions about the crusher machine, please feel free to contact us at any time by e-mail or phone.