Installation, Adjustment and Operation of Vibrating feeder

Installation, Adjustment and Operation of Vibrating feeder

The manufacture sends the machine set after assembly and unloaded test run; customers should check carefully when they receive the machine to avoid problems that might happen during transportation; the installation, adjustment and operation of the vibrating feeder should pay attention to following issues

1. For the machine generates great vibration, we suggest installing the feeder onto concrete foundation, and calculating the foundation height, depth and area according to earth condition; the suggested foundation weight is twice as heavy as feeder; for the installation dimensions, please refer to the drawing. The foundation height and discharging form are decided by the local terrain and there are two forms available: steel structure and concrete platform, customers can increase or decrease the height to adapt to the next process

2. The discharging chute trough or chute funnel is the accessorial anchoring device, and the clearance with the machine is 90mm vertically and 40 mm horizontally.

3. Clear the anticorrosive grease on the vibration exciter and infuse lubricating oil.

4. Test run the machine when the installation and adjustment are finished, the unloaded test run should reach the following standards:
(1)Two hours of continuous operation;
(2)No loosen phenomenon to any firmware
(3)No abrasion, scrape or attrition to any frictional parts; no unusual noise and vibration stably.