Hammer Crusher Structure

Hammer crusher box, rotor, hammer head, impact liner, sieve plate and so on.

Features of Hammer Crusher

1. The working hammer head is cast with new technology, which is wear-resistant and impact-resistant.

2. According to customer requirements, the required granularity can be adjusted.

3. The body structure is sealed, which solves the problem of dust pollution in the crushing workshop and dust leakage from the body.

4. The overall design has the advantages of beautiful appearance, compact structure, less wearing parts, and convenient maintenance. It is an upgraded product.

Working principle of hammer crusher

The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port, and is pulverized by the impact, impact, shearing and grinding of the high-speed moving hammer. In the lower part of the rotor, there is a sieve plate, and the particle size smaller than the sieve hole size in the crushed material is discharged through the sieve plate, and the coarse particle size larger than the sieve hole size is retained on the sieve plate and continues to be hit and ground by the hammer, and finally passes through the sieve plate Drain out of machine.